How to Fix Windows 10 Wi-Fi Problem?

How to Fix Windows 10 Wi-Fi Problem?

How to Fix Windows 10 Wi-Fi Problem

If Windows 10 Wi-Fi doesn’t work, it’s one of the most frustrating issues. Since much of the modern computing system is based on web connectivity, disconnecting from the Internet can shake productivity.

1. Wi-Fi is Connected But There is No Internet

In some cases, Windows is connected to the Internet and claims that the connection is secure, but you cannot access the Web. Usually, the cause of the problem is the TCP / IP stack, IP address, or DNS client cache failure.

First, try running the native Windows Network Troubleshooter. You can find it in Settings> Update & Security> Troubleshooting> Internet Connection.

If this does not work, open [Command Prompt] and type the following command. Press Enter after each command.

  • netsh winsock reset
  • ipconfig /release
  • netsh int ip reset
  • ipconfig /renew
  • ipconfig /flushdns

2. Windows 10 Wi-Fi Driver Issues

Earlier in this article, we already explained how to remove and reinstall the Wi-Fi driver, but if you are having problems with the Wi-Fi drivers in Windows 10, you can take a few more steps. You can try. Update your Windows 10 driver or go to an earlier version.

To update your Wi-Fi driver, follow these steps:

Right-click the Start menu.
Click [Device Management].
Expand the Network Adapter drop-down menu below.
Right-click on the adapter and select Properties.
Click the [Guide] tab.
Select [Update Driver] or [Roll Back Driver].

If Windows cannot automatically detect the updated driver, you should be able to find it on the manufacturer’s website.

3. Windows 10 Is Not Connecting to Wi-Fi

If you receive the message “Windows 10 cannot connect to this network” when trying to establish a network connection, it may be due to a network adapter.

The best solution is to uninstall the network adapter driver so that Windows can automatically reinstall the driver.

Follow the steps below to complete the process.

  • Press Windows + X and click [Device Management].
  • Right-click the network adapter and select Uninstall.
  • When prompted, click Remove Driver Software for this device.
  • Restart the machine and Windows will automatically install the driver.

4. Firewall is Preventing the Connection to the Network

Windows has a built-in firewall application. Allow or block inbound and outbound traffic to protect it from malicious content. However, it may block access to the entire computer.

Obviously, this is not the default behavior. You may have unintentionally changed the settings or an outdated application has overridden an existing rule.

Fortunately, whatever the cause, it is easy to correct. The following solution works for both firewall applications and for “third-party firewall applications”.

  • Open the Start menu and enter the command prompt.
  • Right-click the top link and select Run as Administrator.
  • Type “netsh advfirewall set allprofiles” and press Enter.
  • Check if Internet access is working right now.

To re-enable the firewall, go back to the command prompt and type “netsh advfirewall set allprofiles state”.

5. Wi-Fi Doesn’t Have a Valid IP Configuration

If you see the message “Wi-Fi does not have valid IP configuration”, start by entering the four network commands described above.

If the problem persists and Wi-Fi still doesn’t work in Windows 10, you can take two more steps.

Change network name and password

Some users report that simply changing the network name and password solves the problem.

The exact steps will vary from router to router, but you usually need to connect to the router using an Ethernet cable, enter the router’s IP address in a browser, log on to the device gateway, and find the correct domain. Make sure you use the right type of Wi-Fi security when changing this information.

Set the Wi-Fi Network’s Channel Width

Without being too technical, routers can transmit networks to different channels. If there are too many routers around the same channel, the signal may be full.

Log on to the router portal and find your channel settings. Adjust automatically if possible. If there is no automatic configuration, try a few different channels to see if this solves the problem.

6. How to Find Wi-Fi Password on Windows 10

If you buy a new router (or your ISP issues a new router), you should always take the time to change the default name and password for your network. A good habit in terms of security.

But what if I forget my password? You can reset your router, but there is no less dramatic solution. The saved Wi-Fi password can be found in Windows 10.

Follow the steps below.

  • Right-click the [Network] icon on the taskbar.
  • Select Open Internet network settings.
  • In the new window, click Change Adapter Options.
  • Right-click the Wi-Fi connection and select Status.
  • Click [Wireless Properties].
  • Click the Security tab.
  • Check the box next to Show text.

7. No Wi-Fi Networks Found

If your Windows machine cannot find a Wi-Fi network, run some basic troubleshooting tests before proceeding. Is the router turned on? Is it within network range?

If the answer to both of these questions is yes, the next step is to update or reinstall the network adapter driver. We have already shown you how.

Finally, change the Wi-Fi adapter area. Easily. Use the guide below.

  • Press the Windows + R key.
  • Type “devmgmt.msc” and press Enter.
  • Expand the Network Adapter section.
  • Right-click the network adapter name.
  • Select a property.
  • Click the [Advanced] tab.
  • Identify countries and regions.
  • Select an entry by location.

Note: Not all network adapters have access to country and region properties.

8. Forget Wi-Fi Network on Windows 10

You may need a machine to forget your Wi-Fi network. You may be using a new router or removing completely old networks to which you are connected and no longer in use.

Forget Wi-Fi networks in Windows 10 is easy:

Open the Start menu and click Settings.
Click Network and Internet.
Select “Wi-Fi” from the menu on the left side of the screen.
Click Manage known networks.
Highlight the name of the network you want to forget.
Click the “Forget” button.

9. Windows 10 Keeps Dropping the Wi-Fi Connection

You may need a machine to forget your Wi-Fi network. You may be using a new router or you may have deleted a completely outdated network that is no longer connected and in use.

Forget Wi-Fi networks in Windows 10 is easy:

Open the Start menu and click Settings.
Click Network and Internet.
Select “Wi-Fi” from the menu on the left side of the screen.
Click Manage known networks.
Highlight the name of the network you want to forget.
Click the “Forget” button.

10. Your Antivirus Prevents Connecting to the Network

Like a firewall, an antivirus can cause connection problems.

Visit the AntiWindows Defender Security Center to see the antivirus applications installed on your computer. It is listed in the All Apps list in the Start menu.

After you open the app, expand the box to the left and click Virus and Threat Protection. It shows which applications are active and provides shortcuts to the application’s interface.

Access the interface of the current application and temporarily disable the service.

How to Fix Windows 10 Wi-Fi Problem?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.