How To Fix Windows 10 Won’t Boot Issue

How To Fix Windows 10 Won’t Boot Issue; 11 Fixes to Get Your PC Running Again

How To Fix Windows 10 Won’t Boot Issue

Fix Windows 10 Won’t Boot Issue: Few computer problems are just as frustrating as PCs refusing to boot. If you cannot initialize the system, it is difficult to move forward to find the source of the problem.

Of course, there is no reason to despair if your Windows 10 computer is not running. Even if things look dark on your computer, you can try so many fixes that cannot be repaired. Windows 10 offers several ways to organize the startup process and there are some simple techniques you can do yourself.

Fortunately, this guide will help you find the culprit who does not want to start your computer.

Check Your Battery

If you use a laptop, battery problems may cause boot problems. It’s worth trying an alternative charging cable to see if the problem goes away. Try the cable on another laptop to make sure the cable works. Then remove the system battery and connect the device to a power source.

Removing the battery allows you to determine if the problem is due to a hardware problem. The point here is always to try just one item. If a power supply problem prevents you from starting, it is important to know whether the battery, charging cable, or other component needs to be replaced.

Try Windows Safe Mode

The most direct solution to Windows 10 boot issues is Safe Mode. This is an alternative boot program that starts your computer with minimal software. A modified boot process can avoid driver and software issues. Paradoxically, booting the computer in safe mode can fix boot problems. It is not clear which process is running in safe mode, but experience has shown it to be an effective and easy solution.

However, if your computer does not start, you may have trouble entering Safe Mode. There are two relatively easy ways to get into it.

Method 1: Enter Safe Mode From the Windows Recovery

Most computers that cannot be started can hang (or do not progress) on the Windows boot screen. (For other Windows issues, see the Windows troubleshooting guide.)

From here, you can force your computer into safe mode by interrupting the boot process three times in a row. This will automatically trigger Windows recovery. From the Options Options Recovery Window, select Troubleshooting> Advanced Options> Startup Settings.

From the startup settings, you can turn on or off the Internet and restart your computer in safe mode. Both options should work.

Method 2: Safe Mode with a Windows 10 Recovery Drive

If you can’t get to safe mode, you need to create a Windows 10 USB recovery drive. The recovery module contains the Windows 10 recovery environment. This was accessed by tapping F8 on startup. Unfortunately, Microsoft has decided to remove this feature.

To create a recovery drive, you need another Windows 10 computer and a USB drive with at least 512MB of storage. If you want to back up a system (you will be able to back up system files to a recovery drive), you need 16 GB of storage.

Start [Control Panel] and create a recovery unit.

Then follow the instructions.

After you create a recovery drive, you can start the computer only if you turn on a USB drive (also known as a UEFI or BIOS) that can boot from the POST environment. After turning on the USB drive as bootable, insert the drive into the computer and restart (you may need to press the reset button or hold down the power button for a few seconds).

Unplug All Your USB Devices

A major problem with the Windows 10 update is that your computer may not boot due to USB device conflicts. To resolve this issue, remove all USB devices (and other unnecessary peripherals) and restart your computer.

If your computer remains on the same loading screen, disconnecting all USB devices will automatically fix the problem. You may also need to restart your computer.

Turn Off Fast Boot

In the BIOS or UEFI there is a setting called “Quick Start” and Windows 8 and later operating systems can boot very fast by downloading the drivers. Unfortunately, Windows updates can break Fast Boot compatibility. Fortunately, fast booting can be turned on and off in the BIOS.

The input method on the BIOS / UEFI screen differs from computer to computer. To find the right way for your computer, see the guide to finding your computer’s UEFI / BIOS.

In most cases, pressing the [Delete] key at startup will activate the POST environment. The other two common keys that can work are “F2” and “Escape”.

After joining the BIOS or UEFI, the Quick Start option is usually part of the “Advanced” option, but it can be anywhere.

If you don’t see the Quick Start entry, your computer was created before 2013 because it does not include the Quick Start option.

Boot to the Command Prompt Interface

If your computer can’t start properly, you can do little. However, it can also launch directly from the command line to extend the range of functions. This interface allows you to perform additional troubleshooting steps and, in some cases, fix the problem. To perform the steps, Windows 10 needs to be installed on a “boot disk or USB drive”, so configure using another computer before you start.

To start the command prompt, start the system. When initializing, note the details of key combinations that can be inserted into the BIOS. This information is usually provided along with the seller’s logo.

Go to the Startup tab and make the USB drive or DVD the first boot device. Your choice depends on where you have a copy of Windows 10. Again, refer to the on-screen instructions, as the details of this process may vary from system to system.

Then insert the drive or drive that contains Windows 10 into the system, save the settings, and restart your computer.

When prompted, use the keypad to indicate that you want to boot using a drive or drive. Enter the required language, currency, and input settings and select “Repair Your Computer” on the next screen. Then, select Troubleshooting> Advanced Options> Command Prompt and a prompt will appear for the command prompt.

Try a Malware Scan

Malware is an important cause of non-open computers. One common way to deal with malware that causes startup problems is a malware protection program that can boot from a USB drive or DVD. Some companies, such as the BitDefender rescue CD, offer this software for free. One of my favorites is the AVG Rescue CD [broken link] (can be installed on a USB drive regardless of name).

After viewing the CD on a USB drive, you can insert the drive and start up the computer with problems. If you have set up your computer to boot from the recovery unit, it will boot into the AVG rescue environment. Then, scan for malware.

Use System Restore or Startup Repair

If you are already running Windows 10 from disk or drive, it is worth using some utilities available as part of the process. Booting from the drive, as described above, gives you access to options to restore your computer to normal. On the Advanced Options screen, look for links to System Restore and Startup Repair.

System Restore is a utility that lets you go back to a previous restore point when your computer is functioning properly. You can fix startup problems caused by user changes, not hardware failures.

Startup Repair is a general-purpose troubleshooter for issues that prevent Windows from starting. If you are struggling to find the cause of the startup problem, it is recommended that you run the utility if a solution is found.

Dodge the Windows 10 Bootloader

A new version of the Bootstrap Utility may occur if you are having trouble trying a new installation of Windows 10. This may prevent attempts to reach an existing operating system installation on another drive.

Fortunately, there is a relatively simple way to improve this situation. Start the command line interface and type:

bcdedit /set {default} bootmenupolicy legacy

Restart your computer and notice that the legacy bootloader interface has been replaced by a Windows 10 replication. There is no problem in logging into Windows 10 Safe Mode or accessing your existing operating system installation.

Reassign Your Drive Letter

On multiple-disk systems that are installed, Windows 10 startup issues may occur if the operating system volume (OS) drive letters are not assigned incorrectly. However, starting the command line interface can fix this problem with little effort.

Start a command prompt window as described above and run the Disk Partition Utility by typing:

diskpart

When this is done, enter the volume of the list and print the details of all the volumes that are connected to the system

From here, you can use the letter selection and assignment commands to reposition the correct letters in non-assigned volumes. For example, if you want to assign the letter E to the volume of the audio CD in the image above, first enter “select volume 0”, and then type “assign letter = E” to complete the process.

As always, be very careful when making changes to the command line. If you make a mistake here, you may soon have more problems than your computer.

Try a Third-Party Utility

The exact cause of the problem is the most difficult part of determining a startup problem. If the system cannot boot, it is difficult to locate the problem. However, a third-party utility called a “startup repair floppy disk” may be more successful.

Disk Boot Repair Disk is an open-source rescue disk that can be used to automatically detect and repair issues that may prevent your computer from starting up. The use is very simple. All you have to do is choose whether to use 32 or 64 bit versions of Windows.

Trials and corrections are performed automatically, but have more control options.

There is no guarantee that your computer will be fixed, but it can help detect hidden problems.

Factory Reset

At this point, use the most difficult and destructive repair options. In addition to restoring the factory settings, the most difficult options include restoring and updating your computer. Each has its advantages and disadvantages. If you try all the other options, you might be disappointed.

Restore to factory settings. Some applications and other data will be lost, but you may want to keep some files. A “Windows 10 Factory Reset” (Microsoft simply calls this “Restore” procedure) restores the computer to its default mode.

Windows 10 Won’t Boot Issue Fixed!

Resolving Windows 10 startup problems is worse than in Windows 7 due to the removal of accessible safe mode. (Microsoft has unchecked F8 to boot in safe mode so that it can start 2 seconds faster). So create a system recovery drive using a 16 GB flash drive It is very important to do so.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.